Apple Color StyleWriter 4100 4500 Service Source - download pdf or read online

Read or Download Apple Color StyleWriter 4100 4500 Service Source PDF

Best nonfiction_1 books

Jeff Birkby's Touring Hot Springs Montana and Wyoming: A Guide to the PDF

Precise info at the top usual and obtainable sizzling springs in Wyoming and Montana.

Wm. Stage's Fading Ads of St. Louis PDF

Sooner than the billboard, radio or tv advertisement, there has been the painted advert. this present day, those getting older advertisements seize the mind's eye, harkening again to a bygone period. Vanishing paint on brick partitions speaks to a time while trade was once a lot easier and masses extra direct. Few towns in the US have produced as many interesting fading advertisements as St.

Additional info for Apple Color StyleWriter 4100 4500 Service Source

Example text

Insert the bottom of the sensor board first. Tilt the board away from the chassis and align the guide pin against the board’s centering guidehole. Rotate the sensor board toward the chassis and snap it into place. Take Apart Flex Support Flex Support - 28 Flex Support Before you begin, remove the following: • Output tray • Banner lever • Length adjuster • Input tray • I/O cover • Top cover • Logic board • Ground Bracket Caution: Review the ESD precautions in Bulletins/ Safety. Take Apart Flex Support - 29 1 Flex Support Pull the flex support straight up and remove it from the chassis.

Take Apart Sensor Board - 27 1 2 Latch Latch Sensor Board Spread the latches outward. Tilt the sensor board forward and remove it along with its cable. Replacement Note: Put the cable through the chassis opening. Insert the bottom of the sensor board first. Tilt the board away from the chassis and align the guide pin against the board’s centering guidehole. Rotate the sensor board toward the chassis and snap it into place. Take Apart Flex Support Flex Support - 28 Flex Support Before you begin, remove the following: • Output tray • Banner lever • Length adjuster • Input tray • I/O cover • Top cover • Logic board • Ground Bracket Caution: Review the ESD precautions in Bulletins/ Safety.

Doing so may affect print quality and require replacement of the entire mechanical assembly. Take Apart Pressure Plate - 16 Pressure Plate Before you begin, remove the following: • Output tray • Banner lever • Length adjuster • Input tray • I/O cover • Top cover Pressure Plate Take Apart Pressure Plate - 17 Pressure Plate 1 2 Pressure Plate Latch 3 Press the pressure plate latch outward. Lift up the left side of the pressure plate. Remove the pressure plate. Take Apart Base - 18 Base Before you begin, remove the following: • Output tray • Banner lever • Length adjuster • Input tray • I/O cover • Top cover Base Take Apart Base - 19 Paper Motor Note: The printer is not attached to the base by any screws or retainer clips 1 2 Lift the printer from the base.

Download PDF sample

Apple Color StyleWriter 4100 4500 Service Source


by Mark
4.5

Rated 4.99 of 5 – based on 39 votes